Skip to main content

Search

Exterior Finishing: Vinyl / PVC

"F" Control Joint (with removable tape)

Recommended for smooth finishes

Removable tape protects deep "V" expansion slot during construction. 
"F" Series Control Joint and Vent

Designed to work on narrow overhangs

Where vents are needed to go against fascia or walls.
1550
1550-APP
Control Joint

Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings

Flat flange for thinner, 1-Coat applications. 
Control Joint and Reveal Combinations

Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings

Also creating 1/4" to 1-1/2" reveal in Stucco.
Control Joint with Removable Tape

Recommended for smooth finishes

Removable tape protects the deep "V" groove during construction. J-hooks on the ground help reduce plaster shrinkage.
DEFS "F" Control Joint w/Removable Tape

Designed to relieve stress caused by expansion and contraction in DEFS applications

Also controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable tape creates a mask over the expansion…
DEFS Control Joint w/Removable Tape

Designed to relieve stress caused by expansion and contraction in DEFS applications

Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a clean…
E-Flange™ Control Joint

PVC Control Joint with Embeddable Flange design

Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided for alignment and base for sealants.
EIFS/DEFS Control Joint w/Removable Tape

Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applications

Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a…
CJV16-T
CJV16-A
Factory Fabricated Vinyl Control Joints

Control joint intersections are manufactured in a controlled factory environment to the highest quality standards

Miter cuts are made with precision to ensure proper fit at all connections.  
Inside Control Joint (with removable tape)

Designed to relieve stress caused by expansion and contraction

In wall and ceiling inside angles.
Inside Corner Control Joint

Used to straighten an inside corner

For a neat, straight edge.
Soffit Vent Control Joint Combination

Continuous, one-piece, combination design like a control joint

Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape

Relieves moisture from stucco

The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions.  Install on frame construction for use in stucco plane transitions.