Search

Exterior Finishing: Vinyl / PVC

Products > Exterior Finishing > Vinyl / PVC
Show All List Grid
"F" Series Architectural Soffit Vent

AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco

3/4" elongated vent holes.
Link
"F" Series Control Joint and Vent

Designed to work on narrow overhangs

Where vents are needed to go against fascia or walls.
Link
Architectural Soffit Vent

Series of one-piece soffit vent with a reinforcing rib to key into stucco

3/4" elongated vent holes.
Link
FCS Soffit Vent

Available in several grounds and widths

Can be ordered with the 300VFZ clip for installation.
Link
Miscellaneous Soffit Vent

One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco

May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Link
Soffit Vent Control Joint Combination

Continuous, one-piece, combination design like a control joint

Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Link
Soffit Vent with J-Flange

J-bead flanges cover the raw edges of soffit board

One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the soffit vents. 
Link
Soffit Vent with Perforated Flanges

Provides an economical means for venting soffit areas

One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent clips are provided for proper…
Link
Soffit Vents (One-Piece with Edge Clip)

Continuous one-piece Soffit Vent

Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Link
Soffit Vents (One-Piece)

Continuous one-piece Soffit Vent

Reinforcing rib to key into stucco and plaster with a perforated flange.
Link
Soffit Vents (Three-Piece with Edge Clip)

Continuous three-piece Soffit Vent

For stucco and plaster.
Link
Soffit Vents (Three-Piece)

Continuous three-piece Soffit Vent

For stucco and plaster.
Link
Soffit Vents (Two-Piece Narrow Overhang)

Continuous two-piece Soffit Vent

For stucco and plaster with vertical edge clips provided for special installations.
Link
Surface Mount Soffit Vent

One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications

Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to connect the soffit vent and to assist in…
Link
Vented Drip Screed

Designed to address finishing the plaster to the vertical soffit area intersection

When a drip and soffit vent need to be combined.
Link